进口高温过滤器德国洛克质量优异
价格
订货量(台)
¥2100.00
≥1
店铺主推品 热销潜力款
㜉㜆㜊㜇㜅㜉㜊㜈㜃㜊㜈
在线客服
- 基本信息
- 品牌:德国洛克
- 型号:DE LOCKE
- 驱动方式:自力式
- 介质温度:-20℃≈600℃℃
- 工作压差:1.6~32Mpa
- 适用介质:蒸汽
- 压力环境:常压
- 货号:20204201
- 用途:过滤
- 外型尺寸:中型
进口高温过滤器德国洛克质量优异
进口高温过滤器性能范围:
适用温度 -20℃≈600℃
公称压力 1.6~32Mpa 300PSI~5000PSI
公称通径 DN15~DN500
驱动方式 自力式
连接方式 螺纹、法兰、焊接
结构形式 Y型、T型、U型、一字型
阀体材质 铸铁、球墨铸铁、铸钢、碳钢、不锈钢
适用介质 水、油品、蒸汽、天然气、液化气、气体、液体以及某些腐蚀性液体等。
制造标准 德国洛克原厂标准
应用场合 电站、冶金、建筑、锅炉、设备、管道、热能、空调、消防、给排水、水处理、石油化工、造纸印刷厂。
进口高温过滤器产品概述:
德国《DE LOCKE》洛克 进口高温过滤器(high temperature filter)用于2.5MPA, 600℃以下高温高压气、液体连接的硬管路系统的过滤器。不锈钢滤芯采用锥形孔,均匀分布在滤芯四周侧面,流体介质从锥形孔大端进小端出,流速加快,更易清洗滤芯内污物。
本过滤器结构合理,使用方便。适用水、油品、蒸汽、天然气、液化气、气体、液体以及某些腐蚀性液体等中高压介质。产品广泛应用于水处理设备、化工设备、石化设备、石油设备、造纸设备、采矿设备、电力设备配套等领域。
Introduction of imported high temperature filter products:
German "de Locke" imported high temperature filter is used for the filter of 2.5MPa, high temperature and high pressure gas and liquid connection hard pipeline system below 600 ℃. The stainless steel filter element adopts the conical hole, which is evenly distributed on the sides of the filter element. The fluid medium enters from the large end of the conical hole and exits from the small end, which speeds up the flow rate and makes it easier to clean the dirt in the filter element.
The filter has reasonable structure and convenient use. It is suitable for water, oil products, steam, natural gas, liquefied gas, gas, liquid and some corrosive liquids. Products are widely used in water treatment equipment, chemical equipment, petrochemical equipment, petroleum equipment, papermaking equipment, mining equipment, power equipment and other fields.
进口高温过滤器产品特点:
1.与同等流量过滤器相比,结构紧凑体积小。
2.使用压力范围宽。
3.换滤芯方便,用户可根据安装空间,打开上盖,更换滤芯,可以旋下外壳(先放油)从下面取下滤芯。
4.安装固定方便:如用户按标准流向安装有困难时可拆下盖上4个螺钉,把盖转动180度。这样就改变了介质流动方向。
5.该过滤器设有旁通阀和压差发讯装置,双重保护功能。当滤芯污染堵塞至进出口压差值为发讯器调定值时,发讯器发讯,此时必须更换滤芯
Features of imported high temperature filter products:
1. Compared with the same flow filter, it has compact structure and small volume.
2. Wide pressure range.
3. It is convenient to change the filter element. According to the installation space, users can open the upper cover and change the filter element. They can screw down the shell (drain the oil first) and take down the filter element from below.
4. Easy to install and fix: if it is difficult for the user to install according to the standard flow direction, remove the four screws on the cover and turn the cover 180 degrees. This changes the direction of the medium flow.
5. The filter is equipped with bypass valve and differential pressure signal device, which has dual protection function. When the filter element is polluted and blocked until the pressure difference between the inlet and outlet is the set value of the transmitter, the transmitter sends a signal, and the filter element must be replaced at this time
进口高温过滤器订货须知:
A、若订货前还未选定型号,请向我们提供您的使用参数:
1.公称通径 2.产品型号 3.流体性质(包括公称压力、温度、介质) 4.阀体、密封材料 5.连接方式
B、若已经由设计单位选定我公司的产品型号,请按型号直接向我司销售部订购
C、当使用的场合非常重要或管路比较复杂时,请您尽量提供设计图纸和详细参数,由我们德国洛克阀门技术员为您审核把关。
D、感谢您访问我公司的网站,如有任何疑问.
您可以致电给我们《》我们一定会尽心尽力为您提供优质的服务!